现如今，不锈钢反应釜是化工、食品及医药等行业中常用的反应设备之一。在使用不锈钢反应釜时，为了避免在操作反应釜时操作不当，导致反应釜发生故障。我们应当注意以下几点措施。
1、不锈钢反应釜运作时，严格避免金属或块状硬物掉进不锈钢反应釜内，防止损坏罐壁；
2、接通电源后使搅拌运行，并观察减速机及搅拌等传动件有无异常；
3、夹套或内胆升降压力、温度需要缓慢，这样能防止不锈钢反应釜受到冷热冲击，产生内壁鼓包现象，并严禁接近或超过设备的很高允许工作压力、严禁接近或超过设备的很高允许工作温度。
4、出料遇物料粘稠堵塞时，禁止用金属工具通开，以免损坏内壁。
5、出料后，不锈钢反应釜表面粘附的物料应及时清理，清洁时要留意温差。
6、不锈钢反应釜在进行升温或降温的过程中需要尽量控制罐壁温差，冷罐加热料，其热罐加冷料
1. When the stainless steel reactor is in operation, metal or lump hard substances should be strictly avoided falling into the stainless steel reactor to prevent damage to the tank wall.
2. Turn on the power supply and make the agitation run. Observe the abnormality of the reducer and the agitation transmission parts.
3. The pressure and temperature of jacket or inner liner need to be slowly raised and lowered, so as to prevent the stainless steel reactor from being subjected to cold and hot shock, resulting in inner wall bulging phenomenon, and strictly prohibit approaching or exceeding the high allowable working pressure of equipment, and prohibit approaching or exceeding the high allowable working temperature of equipment.
4. When discharging material is blocked by viscous material, it is forbidden to use metal tools to open it in order to avoid damaging the inner wall.
5. After discharging, the adhering materials on the surface of stainless steel reactor should be cleaned up in time, and the temperature difference should be noticed when cleaning.
6. In the process of heating or cooling stainless steel reactor, it is necessary to control the temperature difference of tank wall as far as possible, heating material of cold tank and adding refrigerant in hot tank.
